Chemical Process Safety Sharing

Introduction Chemical Process Safety Sharing

Chemical Process Safety Sharing (CPSS), a Community of Practice (CoP) under TIChE established since 2018, CPSS is a network of professionals ranging from academia, industry, and government sectors, who have common interest in Process Safety, Safety Engineering and its applications for Process Safety. Therefore, our Vision is to be No.1 and the biggest community of Process Safety Sharing Platform to share process safety knowledge to enhance Zero accident safety in the chemical industry. Process Safety community is for everyone involving with Process Safety, Process Engineering field.

CPSS Mission:

To exchange knowledge, experience and best practice in Process Safety Engineering & Safety Technology without disclosing confidential information
To create a network between groups of people in industry, education, technology dealers and other sectors related as a reference in Process Safety with qualified personnel to give advice real problems are collected in industry etc.

Our activities include semi-annual Community Knowledge Sharing Day, Process Safety consultation & service, and news on Process Safety technology shared in Facebook for community members and general public.

We are committed to provide and enhance process safety knowledge and solutions to many industries.

1st Chemical Process Safety Sharing (CPSS), 13 June 2018, Thailand

1. Emergency Isolation Valves (EIVs)
2. Misunderstanding of Overpressure Scenarios Protection by Relief Valves
3. SIL Assessment
2nd Chemical Process Safety Sharing (CPSS), 12 October 2018, Thailand

1. Awareness of Static Electricity
2. Process Safety Competency Development
3. Safety Critical Elements
4. Points of concern for hazardous area classification
3rd Chemical Process Safety Sharing (CPSS), 31 January 2019, Thailand

1. Building Compliance for Fire Protection System
2. What’s the right thing to do? An Introduction to Safety Philosophy
3. “Process Boiler Safety Regulations”
4. Fire Pump Design Practice(PSRM)
5. Process Safety within Solvay : Risk Assessment
4th Chemical Process Safety Sharing (CPSS), 19 June 2019, Thailand

1. The Safety Design to Protect Vibration in Heat Exchanger
2. Full Surface Fire Fighting and Improvement for Crude Tank Area
3. Fire and Gas System Design
4. Center of Process Safety and Risk Management (PSRM)
5. The Optimize Design Approach for Flare System Rating
5th Chemical Process Safety Sharing (CPSS), 3 December 2019, Thailand

1. Permit to work
2. Digital Transformation for Safeguards bypass management
3. Improve Layer of Protection in Fired Heater
4. Enhancing major hazard identification using Smart HAZOP
5. Flange management
6th Chemical Process Safety Sharing (CPSS), 5 November 2020, Thailand, Webinar (MS team)

1. Thai Oil Group Pre-Start Up Safety Review (PSSR)
2. Digitalize PSE and Operating Window Collaboration Project
3. IRPC Alarm management
4. CPSS_Improvement of IPL in Unloading Operations of Haz. Mat
5. Linkage software – SAFETI and CFD for blast wall design
6. Introduction to TIChE
7th Chemical Process Safety Sharing (CPSS), 7 May 2021 Thailand, Webinar (MS team)

1. Same same but difference Management of Change (MOC)
2. Bow-tie in EBSM plant (Fire heater)
3. Process Safety Enhancement the last Defense of Bow Tie
4. GC Major Accident Event (MAE) Management Process
5. BLEVE Prevention on Liquefied Petroleum Gas Storage
8th Chemical Process Safety Sharing (CPSS), 29 October 2021 Thailand, Webinar (MS team)

1. (Solvay) Safeguard Audit and Improvement
2. Caustic-SCC in Olefin Plant by Montri (PTTGC)
3. PSM CUI PRESENSTATION (REPCO -SCG) Rev01
4. CARBULIZATION in Steam Interchanger at Dehydrogenation unit (iRPC)rev.1
5. CUI practices, findings and improvements (BST)
6. ERM Combustible Dust
7. Managing Aging Assets_(PTTES)
8. Leaking in Deaerator (TOP)
9th Chemical Process Safety Sharing (CPSS), 9th June 2022, Thailand

1. Consequence based solution for process safety engineering design
2. Facility Siting Implementation for temporary and permanent building
3. Facility sitting in Ethylene plant
4. Hazardous area classification IEC based
5. Quantitative Risk Assessment (QRA) adds value to the journey to excellence in process safety management
6. Safety Moment
7. The Use of Bow Ties in Process Safety Auditing.
8. What’s wrong with risk matrix
10th Chemical Process Safety Sharing (CPSS), Thailand

1. The Next Chapter of PSM in SCGC
2. Safety Firefighting Design for Jetty
3. Panel Discussion Topics
4. Predictive Rotating Digital Transformation
5. Fire Water System For Highly Hazardous Chemicals Industrials

Chemical Process Safety Sharing

Introduction Chemical Process Safety Sharing

We are committed to provide and enhance process safety knowledge and solutions to many industries.

Society Worldwide